


Type 2 to Type 2 EV cable, 22kW 32A, 5m long. Compatible with public and home charging stations. Safe, fast, and durable solution.
This Type 2 electric car charging cable connects a compatible electric vehicle to a wallbox or public AC charging point with a Type 2 socket. Its 32A three-phase rating supports charging power of up to 22 kW, while the 5-metre length provides practical reach for home, workplace and public charging.
The cable does not determine the charging speed on its own. Actual power is limited by the vehicle's onboard charger, the charging point, the electrical installation and the selected settings.
Check that both the vehicle and the charging point use a Type 2 AC connection. Also confirm the charging power accepted by the vehicle, because a car limited to 7.4 kW or 11 kW will not charge at 22 kW even when this cable is connected to a 22 kW station.
| Product type | Mode 3 AC charging cable |
| Connectors | Type 2 to Type 2 |
| Maximum charging power | 22 kW |
| Maximum current | 32A |
| Phases | Three-phase |
| Rated voltage | 400V AC |
| Length | 5 m |
Keep the connectors clean and dry and inspect the cable before use. Do not use it if the insulation, connector housing or contacts are damaged.
Browse all our electric car chargers and Type 2 cables, or combine this cable with the Victron EV Charging Station 22kW. You can also explore our wider range of chargers and power supplies.
No. The cable supports up to 22 kW, but the vehicle, charging point and electrical supply must all support that power.
Yes, provided both sides use Type 2. The charging session will operate at the lower power supported by the vehicle or wallbox.
No. It is a Type 2 connection cable for use with a compatible AC charging point or wallbox; it does not replace the charging station.