- New





INNPO Helios H16 LiFePO4 lithium battery with 16kWh of energy storage, designed for residential solar self-consumption, photovoltaic surplus storage and backup power systems. Equipped with high-safety LiFePO4 cells, integrated BMS, LCD display and CAN/RS485 communications.
The INNPO Helios H16 lithium battery has been designed for homeowners and solar energy users who want to maximize photovoltaic energy usage, reduce dependence on the electrical grid and have stored energy available whenever it is needed.
With an energy storage capacity of 16kWh, the Helios H16 allows excess solar energy generated during the day to be stored and used later during the evening or periods of higher electricity consumption.
Thanks to its LiFePO4 (Lithium Iron Phosphate) technology, integrated BMS, CAN and RS485 communications and compact wheeled design, the Helios H16 is an ideal solution for residential solar self-consumption, backup power systems and high-capacity energy storage installations.
A significant portion of the energy produced by solar panels is often exported to the grid without being directly used by the home. The INNPO Helios H16 allows this energy to be stored and consumed later when it is actually needed.
The Helios H16 stores energy generated during peak photovoltaic production hours and makes it available later when consumption increases or during nighttime periods.
The 16kWh storage capacity makes the Helios H16 especially suitable for homes with high electricity consumption, air conditioning systems, heat pumps, swimming pool pumps, electric vehicle chargers and any installation where a significant amount of solar energy storage is required.
This capacity helps increase self-consumption rates and improve independence from the electrical grid.
The storage capacity of the Helios H16 makes it particularly suitable for homes equipped with heat pump systems, allowing solar energy generated during the day to be stored and used later for heating, cooling and domestic hot water production.
The 16kWh capacity helps maximize photovoltaic energy usage in homes equipped with EV charging stations, reducing dependence on the electrical grid and increasing renewable energy utilization.
LiFePO4 chemistry provides excellent thermal stability and a high level of operational safety, making it one of the most widely used technologies for residential energy storage.
Its 16kWh capacity allows a large amount of energy to be stored for household consumption during periods of low solar production.
The Battery Management System continuously monitors voltage, current, temperature and cell balancing to optimize performance and safety.
Allows a large percentage of stored energy to be used while minimizing charging and discharging losses.
The vertical format facilitates installation in garages, technical rooms and energy storage areas while occupying minimal floor space.
Integrated wheels make transportation and installation easier.
The INNPO Helios H16 includes CAN and RS485 communications, allowing integration with a wide range of hybrid inverters and energy storage systems.
Its compatibility is equivalent to that commonly used with other low-voltage 48V storage batteries, provided the inverter supports the required communication protocol and is correctly configured.
If these parameters match the installation requirements, the Helios H16 is an excellent energy storage solution.
| Model | INNPO Helios H16 |
| Technology | LiFePO4 (Lithium Iron Phosphate) |
| Application | Residential solar self-consumption and energy storage |
| Nominal Voltage | 51.2V |
| Nominal Capacity | 314Ah |
| Energy Capacity | 16kWh |
| Internal Configuration | 16S1P |
| Cell Type | 314Ah - 3.2V LiFePO4 |
| Integrated BMS | 100A |
| Maximum Continuous Discharge Current | 100A |
| Maximum Charge Current | 100A |
| Charge Voltage | 58.4V |
| Discharge Cut-off Voltage | 40V |
| Display | Integrated LCD |
| Communications | CAN, RS485 |
| Power Connections | High-current terminals |
| Format | Vertical powerbox with wheels |
| Dimensions (W x D x H) | 460 x 270 x 860 mm |
| Approximate Weight | 115 kg |
| Installation | Indoor |
Yes. In many cases, energy storage can be added to an existing solar installation using compatible equipment.
Yes. It has been specifically designed to store energy generated by photovoltaic systems.
Yes, provided it is combined with a compatible inverter that supports backup functionality.
Greater safety, long lifespan, excellent thermal stability and high energy efficiency.
It is compatible with many hybrid inverters from manufacturers such as Victron Energy, GoodWe, Growatt, Deye, Solis, Huawei, SMA, Sofar Solar, Ingeteam, LuxPower and other LiFePO4-compatible systems using CAN or RS485 communication.
Thanks to LiFePO4 technology and its integrated BMS, it can provide many years of reliable operation depending on installation design and usage conditions.