


INNPO 25.6V 100Ah LiFePO4 Battery with 2.56kWh nominal energy for compatible service, solar, marine, mobility or backup systems. Check dimensions, terminals, charger profile and current requirements before installation.
The INNPO 25.6V 100Ah LiFePO4 Battery provides 2.56kWh of nominal energy in a compact rechargeable lithium iron phosphate format. Its 25.6V nominal voltage is designed for compatible 24V solar, mobility and backup systems, offering the same nominal energy as a 12.8V 200Ah battery at roughly half the current for equal power.
| Brand | INNPO |
| Reference | LIFEPO4-24-100 |
| Chemistry | LiFePO4 |
| Nominal voltage | 25.6V |
| Nominal capacity | 100Ah |
| Nominal energy | 2.56kWh |
| Dimensions | 531 × 206 × 217 mm |
| Approximate weight | 19 kg |
| Terminal | M8 screw terminals |
| Bluetooth | No |
A 24V architecture is often attractive for medium-power inverters, pumps and off-grid equipment because it can reduce current and cable losses compared with an equivalent 12V system. Every charger, controller and load must be rated for the 24V battery voltage range.
A similar case size or nominal voltage does not by itself guarantee a direct replacement. Confirm the terminal layout, available space, charger profile, alternator or DC-DC charger, solar controller and the continuous and peak current required by the connected equipment. Use a charging profile approved for the exact LiFePO4 model; do not assume that every AGM or GEL charger is suitable.
Estimate daily consumption by multiplying each appliance power in watts by its operating time in hours. Add the results, allow for inverter and system losses, and retain an operating reserve. The battery stores 2.56kWh nominal. When calculating autonomy, use watt-hours rather than comparing Ah directly with 12V batteries: 100Ah at 25.6V contains twice the nominal energy of 100Ah at 12.8V.
Explore more LiFePO4 batteries and prismatic cells or ask INNPO to check voltage, capacity and charger compatibility for your installation.
Data sheet
You might also like