


INNPO 12.8V 7.5Ah LiFePO4 Battery with 96Wh nominal energy for compatible service, solar, marine, mobility or backup systems. Check dimensions, terminals, charger profile and current requirements before installation.
The INNPO 12.8V 7.5Ah LiFePO4 Battery provides 96Wh of nominal energy in a compact rechargeable lithium iron phosphate format. The small case and T1 terminals make it relevant for compatible low-power 12V equipment where installation space and weight are limited.
| Brand | INNPO |
| Reference | LIFEPO4-12-7 |
| Chemistry | LiFePO4 |
| Nominal voltage | 12.8V |
| Nominal capacity | 7.5Ah |
| Nominal energy | 96Wh |
| Dimensions | 151 × 66 × 92 mm |
| Approximate weight | 1 kg |
| Terminal | T1 |
Typical uses include portable electronics, small backup supplies, test equipment and low-consumption mobile systems. It is not selected for engine starting unless the equipment and the battery specification explicitly permit that duty.
A similar case size or nominal voltage does not by itself guarantee a direct replacement. Confirm the terminal layout, available space, charger profile, alternator or DC-DC charger, solar controller and the continuous and peak current required by the connected equipment. Use a charging profile approved for the exact LiFePO4 model; do not assume that every AGM or GEL charger is suitable.
Estimate daily consumption by multiplying each appliance power in watts by its operating time in hours. Add the results, allow for inverter and system losses, and retain an operating reserve. Its 96Wh nominal energy is appropriate for modest loads. A 15W device uses 60Wh in four hours before system losses and reserve are added.
Explore more LiFePO4 batteries and prismatic cells or ask INNPO to check voltage, capacity and charger compatibility for your installation.
Data sheet