


Choose a compact 12V 30Ah LiFePO4 battery for auxiliary power projects that need rechargeable energy and clearly specified operating limits. The INNPO LIFEPO4-12-30 has a 12.8 V nominal voltage and 384 Wh nominal energy, calculated as 12.8 V × 30 Ah. It incorporates a protective BMS and M5 threaded terminals. It is not a starter battery and has no Bluetooth or app connectivity.
| Product reference | LIFEPO4-12-30 |
|---|---|
| Chemistry / configuration | LiFePO4 / 4S |
| Nominal voltage | 12.8 V |
| Typical capacity | 30 Ah |
| Calculated nominal energy | 384 Wh |
| Dimensions (length × width × height) | 181 × 77 × 167 mm |
| Weight | 2.8 kg |
| Connections | Positive and negative M5 threaded terminals |
| Continuous discharge current | 30 A |
| Approximate discharge cut-off | ≈10 V |
| Charging voltage and method | 14.6 V / CC-CV |
| Maximum battery charging current | 15 A |
| Recommended charging temperature | 0 to +45 °C |
| Recommended discharge temperature | −10 to +60 °C |
| Case | ABS |
Consider this battery for auxiliary power, 12 V lighting, portable equipment and small solar projects where the equipment accepts a 12.8 V LiFePO4 battery, its charging requirements and its 30 A continuous discharge limit. Size each application around the load, required runtime, available space and connections. A 12 V label alone does not establish compatibility with every UPS, electric vehicle, inverter or other device.
Before placing your order, check 181 × 77 × 167 mm dimensions, M5 terminals, polarity and charging parameters. When replacing an AGM, GEL or conventional lead-acid battery, both the charger and the equipment must accept the new chemistry. If you need assistance, send our technical team the device model, power consumption and charger specifications.
The manufacturer specifies more than 2,000 cycles at 100% depth of discharge, more than 3,000 at 90%, and more than 4,000 at 80%. Testing uses 0.2C charging and discharging (6 A), with at least 80% capacity retention. These are results under test conditions, not a guarantee of identical service life in every installation. Temperature, load and charging behaviour affect battery life.
Use a LiFePO4-compatible charger supplying 14.6 V at no more than 15 A, with constant-current/constant-voltage charging (CC/CV). Do not use lead-acid desulphation or equalisation modes. Charging time depends on the charger current, the initial state of charge and the final charging stage.
The recommended charging range is 0 to 45 °C; the recommended discharge range is −10 to 60 °C. For extended storage, choose a dry location at 15 to 25 °C and check the state of charge periodically in accordance with the manufacturer instructions. Avoid reverse polarity, short circuits and water exposure. BMS protection is not permission to exceed operating limits.
12 V is the commercial system description; the actual nominal voltage is 12.8 V. Your equipment and charger must support the specified LiFePO4 operating parameters.
Runtime depends on the load and usable energy. As a theoretical example, 384 Wh ÷ 100 W gives 3.84 hours using all nominal energy, before losses and discharge limits. This is not a guaranteed runtime.
Only if it has a suitable LiFePO4 mode or adjustment: 14.6 V CC/CV charging at up to 15 A, with no desulphation or equalisation. A 12 V marking alone is not enough.
No. This model has no Bluetooth or app-based monitoring.
The documentation allows these arrangements according to specification, but does not state the permitted number of units or all installation limits. Ask technical support to confirm the configuration before connecting them.
Data sheet