


The Intact Bike-Power AGM CTX4L-BS (YTX4L-BS) motorcycle battery is a sealed, maintenance-free battery with AGM technology, designed to deliver high starting power and superior reliability in motorcycles.
Technical Data
| Voltage | 12 V |
| Nominal Capacity (C20) | 3 Ah |
| Cold Cranking Amps (CCA) | 50 A |
| Technology | Maintenance-free AGM |
| Dimensions (L x W x H) | 113 x 70 x 85 mm |
| Approximate Weight | 1.5 kg |
| Terminal Type | Standard |
Compatibility and Equivalent References
The Intact Bike-Power AGM CTX4L-BS battery is compatible as an equivalent replacement for the following references from other manufacturers, provided that the dimensions, polarity, and specifications match. techniques:
Before installation, it is recommended to check the dimensions, terminal positions, and specific requirements of the vehicle manufacturer.
Warranty
6 months
* As of February 1, 2021, according to Regulation 2019/1148 of the European Parliament and of the Council of June 20, 2019, all motorcycle batteries with separate electrolyte must be filled and activated by the distributor before being sold to the end customer.
| Model and brand | Technology | Capacity | Starting current | Dimensions (L × W × H, mm) | Positive terminal |
|---|---|---|---|---|---|
| Battery Exide ETX4L-BS AGM 3Ah | AGM | 3 Ah | 50 A | 115 × 70 × 85 | Right |
| Battery Yuasa YTX4L-BS AGM 3.2Ah | AGM | 3.2 Ah | 50 A | 114 × 71 × 86 | Right |
| Battery IntAct GEL CTX4L-BS 3Ah 60A | Gel | 3 Ah | 60 A | 113 × 70 × 85 | Right |
| Battery IntAct AGM CTX4L-BS 3Ah 50A | AGM | 3 Ah | 50 A | 113 × 70 × 85 | Right |
| Battery Varta YT4L-BS AGM 3Ah | AGM | 3 Ah | 40 A | 114 × 71 × 86 | Right |
| Battery Exide AGM12-4 AGM Ready 3Ah | AGM | 3 Ah | 50 A | 115 × 70 × 85 | Right |
These are catalogue cross-reference alternatives, not a promise of fit for every motorcycle. Compare dimensional and performance differences; check mounting, terminals and the technology approved for your vehicle. Compare capacities at the same discharge rate.
This product lists 12 V, 3 Ah, AGM; dimensions: 113 × 70 × 85 mm, positive terminal on the right. Also check that terminals and mounting match your battery and that the charging system supports this technology.
Choose a charger for 12 V batteries with a programme compatible with AGM and a charging current approved by the manufacturer. Starting current is not charging current.
Data sheet
You might also like