
As always, perfect
Fast delivery, great value for money. 100 per cent recommended.

4.5/5 · 33 ratings
Fast delivery, great value for money. 100 per cent recommended.
Everything’s fine
A really easy purchase and very fast delivery 💪🏻💪🏻
It arrived quickly and was well packaged, in good condition and in perfect working order
Reviews managed with care and transparency, through an externally supervised process integrated into our quality management system certified by SGS to ISO 9001.
Quality management systemThe Varta YTX12-BS motorcycle starter battery uses AGM technology, with 12V, 10Ah and 150A starting current. It measures 152 × 88 × 131 mm (length × width × height). Check the price and availability of this reference and confirm the installation format before buying.
| Manufacturer | Varta |
|---|---|
| Reference | YTX12-BS |
| Voltage | 12V |
| Capacity | 10Ah |
| Starting current (CCA) | 150A |
| Dimensions: length × width × height | 152 × 88 × 131 mm |
| Terminal layout | Positive terminal on the left |
| Technology | AGM |
| ETN | 510 012 009 |
| Range | VARTA Powersports AGM |
| Other VARTA reference codes | YTX12-4 / YTX12-BS |
Compare the installed battery reference or the vehicle manual. The battery compartment, fixing, positive terminal position and terminal type must accommodate this battery; cables must reach without strain. Two 12V batteries, or batteries with the same Ah rating, are not necessarily interchangeable.
When searching for YTX12-BS, YTX12 BS, YTX12BS, always compare the brand and the product specifications. Different ways of writing the code help identify a format, but do not guarantee identical performance between manufacturers.
The following GEL alternative is available in our catalogue for this battery format reference. AGM and GEL are different technologies; performance and dimensions may vary.
| Reference | Technology | Capacity | Starting current | Dimensions (length × width × height, mm) | Polarity |
|---|---|---|---|---|---|
| Varta YTX12-BS | AGM | 10Ah | 150A | 152 × 88 × 131 | Positive terminal on the left |
| IntAct GEL CTX12-BS | GEL | 10Ah C20 | 210A | 150 × 87 × 132 | Positive terminal on the left |
Check the battery compartment, mounting, terminals and technology approved for the vehicle before replacing the battery. Allow for the dimensional differences shown and use a charger compatible with the chosen technology. A cross-reference alone does not certify compatibility with a specific motorcycle; compare capacities at the same discharge rate.
Once correctly activated and sealed, an AGM battery does not need water topping up. This does not mean it can remain discharged: during long periods without use, check the charge and use a charger suited to AGM and the battery capacity. Do not open a battery that has already been sealed.
No. Ah describes capacity; starting current in A is a different specification. Also check voltage, dimensions, connections and technology, and compare values measured under the same standard or discharge rate.
No. It must support 12V AGM batteries of this capacity. Check the programme and charging current recommended by the battery and charger manufacturers.
Check the vehicle manual or send us the make, model, engine size, year and current battery reference so we can help you check the specifications.
6 months.
| Model and brand | Technology | Capacity | Starting current | Dimensions (L × W × H, mm) | Positive terminal |
|---|---|---|---|---|---|
| Battery Exide ETX12-BS AGM 10Ah | AGM | 10 Ah | 150 A | 150 × 90 × 130 | Left |
| Battery Varta YTX12-BS AGM 10Ah | AGM | 10 Ah | 150 A | 152 × 88 × 131 | Left |
| Battery Yuasa YTX12-BS AGM 10.5Ah | AGM | 10.5 Ah | 180 A | 150 × 87 × 130 | Left |
| Battery IntAct GEL CTX12-BS 10Ah 210A | Gel | 10 Ah | 210 A | 150 × 87 × 132 | Left |
| Battery IntAct AGM CTX12-BS 10Ah 130A | AGM | 10 Ah | 130 A | 150 × 87 × 132 | Left |
| Battery Exide AGM12-10 AGM Ready 10Ah | AGM | 10 Ah | 150 A | 150 × 90 × 130 | Left |
These are catalogue cross-reference alternatives, not a promise of fit for every motorcycle. Compare dimensional and performance differences; check mounting, terminals and the technology approved for your vehicle. Compare capacities at the same discharge rate.
This product lists 12 V, 10 Ah, AGM; dimensions: 152 × 88 × 131 mm, positive terminal on the left. Also check that terminals and mounting match your battery and that the charging system supports this technology.
Choose a charger for 12 V batteries with a programme compatible with AGM and a charging current approved by the manufacturer. Starting current is not charging current.
Data sheet
As always, perfect
Fast delivery, great value for money. 100 per cent recommended.
Everything’s fine
Good service
A really easy purchase and very fast delivery 💪🏻💪🏻
Motorbike battery
It arrived quickly and was well packaged, in good condition and in perfect working order
battery for the Intruder M800
Perfect – the motorbike started first time, everything’s fine
You might also like
Battery IntAct GEL CTX12-BS 10Ah 210A
Battery IntAct AGM CTX12-BS 10Ah 130A