shopping_cart Cart (0)
Battery Charger Victron Blue Smart IP22 24V 12A
€125.65
Tax included
24
V
V
Measurements: 235 x 108 x 65 mm
Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.
EAN/GTIN: 8719076037682
Battery Charger Victron Blue Smart IP22 24V 12A
The Battery Charger Victron Blue Smart IP22 24V 12A is a professional battery charger with integrated Bluetooth that can be used in devices in your workshop as well as in motor vehicles, such as vintage cars, motorcycles, boats, tractors, RVs and campervans.
Compatible battery technologies
Supports the following rechargeable battery technologies, provided that the bank voltage matches the charger output and the battery capacity and permitted charging current are respected.
| Technology | Compatibility and settings |
|---|---|
| Conventional flooded lead-acid / WET | Compatible with the lead-acid programme specified by the battery manufacturer. |
| AGM / VRLA | Compatible. Use the absorption and float voltages recommended for the battery; AGM batteries do not all require the same settings. |
| Gel / VRLA | Compatible with the correct gel profile and voltage limits. Avoid overvoltage and reconditioning unless authorised by the battery manufacturer. |
| LiFePO4 lithium | Compatible with the lithium/LiFePO4 profile and a suitable BMS. Do not use lead-acid equalisation or reconditioning. |
Select Normal, High or Li-ion using the controls available on this model or VictronConnect. AGM and gel are not universal programmes: the final settings must match the battery datasheet.
Not intended for non-rechargeable cells, NiMH or Ni-Cd batteries. Chemical compatibility does not mean that every capacity or voltage is suitable. For LiFePO4, also observe charging temperature limits and BMS protections.
The Blue Smart IP22 24V 12A has a 6-stage adaptative fully automatic charging algorithim and it features 1 output with a voltage of 24V, and a charging current of 12A.
Specifications Victron Blue Smart IP22 24V 12A
| Victron Blue Smart IP22 24V 12A | BPC241242002 |
| Input voltage range | 180 – 265 VAC |
| Charge current, normal mode | 12A |
| Charge current, NIGHT or LOW | 6A |
| Efficiency | 94 % |
| No load power consumption | 0.5 W |
| Frequency | 45 – 65 Hz |
| Number of outputs | 1 |
| Charge voltage 'absorption' | Normal: 28,8 V High: 29,4 V Li-ion: 28,4 V |
| Charge voltage 'float' | Normal: 27,6 V High: 27,6 V Li-ion: 27,0 V |
| Charge voltage 'storage' | Normal: 26,4 V High: 26,4 V Li-ion: 27,0 V |
| Charge algorithm | 6-stage adaptive: test - bulk – absorption - recondition – float – storage |
| Can be used as power supply | Yes |
| Protection | Battery reverse polarity (fuse) Output short circuit Over temperature |
| Operating temp. range | -40 to +60 °C (full rated output up to 40 °C) |
| Humidity (non-condensing) | Max 98 % |
| Battery connection | Screw terminals 16 mm² / AWG6 |
| 230 VAC connection | Cable of 1,5 meter with CEE 7/7 plug |
| Protection category | IP22 |
| Dimensions and weight | 235 x 108 x 65 mm , 1,3Kg |
Victron Accessories for the Blue Smart IP22 (not included in the product)
To communicate battery voltage and temperature to one or more battery chargers, one of the following can be used:
- Victron Smart Battery Sense
- Victron Smart Battery Monitor
- Victron SmartShunt
To communicate battery voltage, temperature and battery current to one or more battery chargers, one of the two can be used:
- Victron Smart Battery Monitor
- Victron SmartShunt
Product Warranty
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.
BPC241242002
Data sheet
- Volts (V)
- 24
- Intensity (A)
- 12
- Length (mm)
- 235
- Width (mm)
- 108
- Height (mm)
- 65
- Weight (kg)
- 1.3
- Bluetooth
- Yes
No customer reviews for the moment.
You might also like
Measurements: 235 x 108 x 65 mm
Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.