shopping_cart Cart (0)
Charge controller Victron BlueSolar PWM-Pro 12/24V-30A
€67.07
Tax included
12
V
V
24
V
V
Measures: 200 x 100 x 57mm
EAN/GTIN: 8719076025399
BlueSolar PWM-Pro 12V-24V 30A Charge Controller
The Victron BlueSolar PWM-Pro 12/24V 30A regulator implements the PWM controller, simple, lightweight and low cost, with advanced functions fully programmable via computer or with the BlueSolar-Pro remote panel (not included).
Characteristics
- Fully programmable lighting control function with day/night timer options.
- The regulator charges the batteries in three programmable stages: initial, absorption and float. It has built-in battery monitoring function (remote panel is required to view status).
- It has an external temperature sensor input (not included).
- The regulator is protected against over current, short circuits and reverse polarity of the panels or the battery, to avoid accidents and damage to the devices.
Specifications Victron BlueSolar PWM-Pro 12/24V-30A
| Battery voltage | 12/24V (Auto detection) |
| Rated charging current | 30A |
| Automatic load shedding | Yes |
| Maximum solar voltage | 28V/55V |
| Self-consumption | < 10 mA |
| Load output | Manual control + low voltage disconnection |
| Protection | Battery polarity reversal (fuse), Output short circuit, Over temperature |
| Ground | Positive Common |
| Working temperature range | -20 to +50°C |
| Humidity (non-condensing) | Max. 98% |
| Protection type | IP30 |
| Weight | 0.5 Kg |
| Measures | 200 x 100 x 57mm |
Warranty
5 years
Integrate Victron monitoring into your system
Browse the Victron Energy range, compare battery monitors and solar charge controllers, and complete your solar energy system. Before buying, check the interface, cable length and compatibility with your Victron equipment.
SCC010030010
Data sheet
- Volts (V)
- 12
24 - Technology
- PWM
- Intensity (A)
- 30
- Large (mm)
- 200
- Width (mm)
- 100
- Height (mm)
- 57
- Weight (kg)
- 0.5
- Bluetooth
- No
You might also like
Measures: 200 x 100 x 57mm