



Rigid 120W monocrystalline Back Contact solar panel with 20.96V maximum-power voltage, 5.73A current and MC4 connectors. Compact 1050 × 580 × 30mm format.
The rigid 120W monocrystalline solar panel with a black frame is designed for photovoltaic installations where available space must be used efficiently. Its 1050 × 580 × 30mm dimensions suit off-grid systems, vehicles, boats and small solar projects when its electrical values match the controller and system.
Under standard conditions it delivers 120W nominal power, 20.96V at maximum power and 5.73A current. Open-circuit voltage is 23.93V and short-circuit current is 6.08A. Confirm that the controller PV input accepts these values, especially Voc.
The module combines an aluminium frame, glass, EVA encapsulation and backsheet. Its junction box is rated at least IP67 and it includes 700mm, 2.5mm² cable with MC4 connectors. The stated operating range is −40 to +85°C.
Its compact format suits campers, caravans, motorhomes, boats, telecommunications, sheds, off-grid homes and other photovoltaic systems where its size and electrical values are suitable.
Do not connect it directly to a battery. Use a solar controller compatible with 23.93V open-circuit voltage, 6.08A short-circuit current, total installed power and battery voltage. It may be used in 12V or 24V systems through a correctly sized MPPT controller.
The 120W rating is measured under standard conditions. Actual output depends on irradiance, orientation, tilt, temperature, shade and system losses. Mount it on a surface that supports its size and weight, using suitable fixings, correctly sized solar cable, electrical protection and correct polarity.
Can it be connected directly to a battery? No. A compatible controller must be installed between panel and battery.
Is it rigid? Yes. Its structure includes an aluminium frame, glass, EVA and backsheet.
Data sheet