shopping_cart Cart (0)
Victron Skylla IP65 24V / 35A (3) 120-240V Battery Charger
€661.49
Tax included
24
V
V
Measurements: 401 x 265 x 151 mm
Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.
EAN/GTIN: 8719076051992
Victron Skylla IP65 24/35 (3) 120-240V Battery Charger
The Victron Skylla IP65 24/35 (3) 120-240V Battery Charger is part of the Victron Skylla IP65 Battery Charger range of Victron Energy and is compatible with a wide range of battery types, including lead-acid, gel, and AGM batteries, with capacity ranging from 150Ah to 350 Ah.
Compatible battery technologies
Supports the following rechargeable battery technologies, provided that the bank voltage matches the charger output and the battery capacity and permitted charging current are respected.
| Technology | Compatibility and settings |
|---|---|
| Conventional flooded lead-acid / WET | Compatible with the lead-acid programme specified by the battery manufacturer. |
| AGM / VRLA | Compatible. Use the absorption and float voltages recommended for the battery; AGM batteries do not all require the same settings. |
| Gel / VRLA | Compatible with the correct gel profile and voltage limits. Avoid overvoltage and reconditioning unless authorised by the battery manufacturer. |
| LiFePO4 lithium | Compatible with the lithium/LiFePO4 profile and a suitable BMS. Do not use lead-acid equalisation or reconditioning. |
Select the battery type in the charger settings. For lithium installations, integrate BMS charge permission using the compatible interface or remote control appropriate to the system.
Not intended for non-rechargeable cells, NiMH or Ni-Cd batteries. Chemical compatibility does not mean that every capacity or voltage is suitable. For LiFePO4, also observe charging temperature limits and BMS protections.
The Skylla IP65 Battery Charger is a high-quality battery charger that is designed to be versatile and reliable for marine and outdoor use. It is fully waterproof and dust-tight, with an IP65 rating, making it ideal for use in harsh environments.
The Victron Skylla IP65 24/35 (3) 120-240V Battery Charger has a LCD display for monitoring, a 7-stage adaptative charging algorithim and it features 3 outputs to charge 3 battery banks, with a voltage of 24V, and a charging current of 35A.
The charger features a 3-stage charging process, including a bulk stage, an absorption stage, and a float stage, which helps to prolong the life of your batteries and ensure that they are always fully charged and ready for use.
Specifications
| Victron Skylla IP65 24/35 (3) 120-240V | SKY024035100 |
| Input voltage and input voltage range | 120/230 V (90-265 V) |
| Maximum AC input current @ 100 VAC | 12A |
| Charge current, | 3 x 35 A (maximum total output: 35 A.) |
| Charge current starter batt. (A) | - |
| Power factor | 0,98 |
| Frequency | 45 – 65 Hz |
| Number of outputs | (1+1) models: 2 (2nd output via 2 pole terminal & 3 A max) |
| Charge voltage 'absorption' | 28,8 V |
| Charge voltage 'float' | 27,6 V |
| Charge voltage 'storage' | 26,4 V |
| Charge algorithm | 7 stage adaptive |
| Charge algorithm Li-Ion | 3 stage, with on-off control or CAN-bus control |
| Can be used as power supply | Yes |
| Remote on-off port | Yes (can be connected to a Li-Ion BMS) |
| CAN-bus communication port (VE.Can) | Two RJ45 connectors, NMEA2000 protocol, not isolated |
| Synchronised parallel operation | Yes, with VE.Can |
| Alarm relay | DPST AC rating: 240 VAC/4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC |
| Protection | Battery reverse polarity (fuse). Output short circuit. Over temperature |
| Operating temp. range | -20 to 60 °C (Full output current up to 40 °C) |
| Humidity (non-condensing) | Max 95 % |
| Battery connection | M6 bolts |
| 230 VAC connection | screw-clamp 6mm² (AWG 10) |
| Protection category | IP65 |
| Dimensions and weight | 401 x 265 x 151 mm / 6 kg |
Victron Accesories for the Skylla IP65 Battery Charger (not inlcuded in the product)
- Victron Skylla-i Control (Ref. REC000300010R)
- Victron BMV-712 Smart Battery Monitor (Ref. BAM030712000R)
- Victron Smartshunt 500A/50mV (Ref. SHU050150050)
Product Warranty
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.
SKY024035100
Data sheet
- Volts (V)
- 24
- Intensity (A)
- 35
- Length (mm)
- 401
- Width (mm)
- 265
- Height (mm)
- 151
- Weight (kg)
- 6
- Bluetooth
- No
No customer reviews for the moment.
You might also like
Measurements: 401 x 265 x 151 mm
Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.