
Battery Charger Victron Blue Smart IP22 12V 20A
V





Measurements: 130 x 186 x 70 mm
Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.
EAN/GTIN: 8719076046097
The Victron Orion-Tr Smart 24-24 12A (280W) DC-DC Charger Isolated is a versatile and reliable DC to DC adaptive 3-stage charger suitable for use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery.
Supports the following rechargeable battery technologies, provided that the bank voltage matches the charger output and the battery capacity and permitted charging current are respected.
| Technology | Compatibility and settings |
|---|---|
| Conventional flooded lead-acid / WET | Compatible with the lead-acid programme specified by the battery manufacturer. |
| AGM / VRLA | Compatible. Use the absorption and float voltages recommended for the battery; AGM batteries do not all require the same settings. |
| Gel / VRLA | Compatible with the correct gel profile and voltage limits. Avoid overvoltage and reconditioning unless authorised by the battery manufacturer. |
| LiFePO4 lithium | Compatible with the lithium/LiFePO4 profile and a suitable BMS. Do not use lead-acid equalisation or reconditioning. |
Set the unit to charger mode and select or customise the battery profile in VictronConnect. Power supply mode does not replace a correctly configured charging profile.
Not intended for non-rechargeable cells, NiMH or Ni-Cd batteries. Chemical compatibility does not mean that every capacity or voltage is suitable. For LiFePO4, also observe charging temperature limits and BMS protections.
This particular model has an input voltage of 24V, an output voltage of 24V, a continuum output current (at 25 °C) of 12A, and a continuum output power (at 25 °C) of 280W, capable of providing fast and efficient charging for your batteries while providing galvanic isolation between the input and output circuits.
Featuring a Bluetooth Smart interface, the Victron Orion-Tr Smart 24-24 12A (280W) can be easily monitored, configured, and updated using the VictronConnect App.
The charger is fully programmable, with a configurable battery charge algorithm or fixed output voltage, and smart alternator compatibility, ensuring that your battery is always charged optimally. (See more information below about the Victron Orion-Tr Smart Product Range of DC-DC Isolated Chargers).
| Orion Tr Smart 24-24 12A | ORI242428120 |
| Input voltage range | 16-35 V |
| Nominal output voltage | 24.2 V |
| Output voltage adjust range | 20-30 V |
| Cont. output current at nominal output voltage and 25 °C) | 12 A |
| Short circuit output current | 30 A |
| Cont. output power at 25 °C | 320 W |
| Cont. output power at 40 °C | 280 W |
| Efficiency | 89 % |
| No load input current | < 80 mA |
| Standby current | Less than 1mA |
| Galvanic isolation | 200 V dc between input, output and case |
| Operating temperature range | -20 to +55 °C (derate 3 % per °C above 40 °C) |
| Humidity | Max. 95 % non-condensing |
| DC connection | Screw terminals |
| Maximum cable cross-section | 16 mm² AWG6 |
| Protection category | IP43 (electronic components), IP22 (connection area) |
| Dimensions and weight | 130 x 186 x 70 mm / 1.3 kg |
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.
Data sheet
You might also like
Battery Charger Victron Blue Smart IP22 12V 20A
Victron SmartShunt 500A / 50mV IP65 Battery Monitor Built-in Bluetooth