Victron Blue Smart IP65 12V 4A Bluetooth Charger

Name: Victron Blue Smart IP65 12V 4A Bluetooth Charger
Brand: Victron energy
SKU: BPC120433064R
Price: 65.03 EUR
Availability: InStock

€65.03

Tax included

Rating: Be the first to write a review!

12
V

Dimensions: 45 × 81 × 183mm · Weight: 0.6kg

Smart 12V 4A charger with Bluetooth, IP65 protection and part number BPC120433064R. For compatible lead-acid and lithium batteries, with normal or low-current mode according to capacity.

Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.

EAN/GTIN: 8719076044611

Victron Blue Smart IP65 12V 4A Bluetooth charger

The Victron Blue Smart IP65 12V 4A is a smart charger for 12V batteries used in motorcycles, classic cars, auxiliary equipment, boats, campervans and motorhomes. IP65 protection suits demanding environments, while Bluetooth enables setup and monitoring through VictronConnect.

Compatible battery technologies

Supports the following rechargeable battery technologies, provided that the bank voltage matches the charger output and the battery capacity and permitted charging current are respected.

Technology	Compatibility and settings
Conventional flooded lead-acid / WET	Compatible with the lead-acid programme specified by the battery manufacturer.
AGM / VRLA	Compatible. Use the absorption and float voltages recommended for the battery; AGM batteries do not all require the same settings.
Gel / VRLA	Compatible with the correct gel profile and voltage limits. Avoid overvoltage and reconditioning unless authorised by the battery manufacturer.
LiFePO4 lithium	Compatible with the lithium/LiFePO4 profile and a suitable BMS. Do not use lead-acid equalisation or reconditioning.

Select Normal, High or Li-ion using the controls available on this model or VictronConnect. AGM and gel are not universal programmes: the final settings must match the battery datasheet.

Not intended for non-rechargeable cells, NiMH or Ni-Cd batteries. Chemical compatibility does not mean that every capacity or voltage is suitable. For LiFePO4, also observe charging temperature limits and BMS protections.

Its adaptive seven-stage algorithm matches the charging process to the battery. A 2A low-current mode is available for smaller capacities, with programmes for lead-acid and compatible lithium batteries.

Recommended capacities

Lead-acid, 4A normal mode	13–40Ah
Lead-acid, 2A low mode	7–40Ah
Compatible lithium, normal mode	8–40Ah
Compatible lithium, low mode	4–40Ah

Main benefits

Integrated Bluetooth with VictronConnect control.
4A maximum charge current and 2A low-current mode.
Adaptive seven-stage algorithm; four stages for lithium.
Power-supply mode.
IP65 dust and splash protection.
Fanless convection cooling.

Technical specifications

Part number	BPC120433064R
Battery voltage	12V
Mains input	220–240VAC nominal · 180–265VAC min./max.
Frequency	50–60Hz nominal · 45–65Hz min./max.
Charge current	4A maximum · 2A low current
Maximum efficiency	94%
Standby power	0.5W
Charge voltages	Normal: 14.4/13.8/13.2V · High: 14.7/13.8/13.2V · Lithium: 14.2/—/13.5V
Protection	Reverse polarity, output short circuit and overtemperature
Operating temperature	−40°C to +50°C; full rated output up to 30°C
Battery connection	1.5m red/black cable; battery clamps and M8 ring terminals included
Ingress protection	IP65
Dimensions	45 × 81 × 183mm
Weight	0.6kg

Useful internal links

Browse our 12V battery chargers, the complete Victron Energy range and other battery chargers.

Before ordering

Check that the battery is 12V, supports the selected charging programme and falls within the recommended capacity range. For larger batteries or faster charging, choose a higher-current Victron charger.