


Victron Smart IP43 24V 25A (1+1), part number PSC242551095. Professional charger for a 24 V service bank, with a 25 A main output and an auxiliary output of up to 4 A for maintaining a starter battery. Bluetooth, VE.Direct and universal 120-240 V input are built in.
Charging technologies: Flooded lead-acid, AGM, gel and LiFePO4; select the appropriate charging profile.
EAN/GTIN: 8719076053545
The Victron Smart IP43 24/25 (1+1) is a professional charger for 24 V systems. The main output supplies up to 25 A to the service bank, while the second output is limited to 4 A for maintaining a starter battery.
Supports the following rechargeable battery technologies, provided that the bank voltage matches the charger output and the battery capacity and permitted charging current are respected.
| Technology | Compatibility and settings |
|---|---|
| Conventional flooded lead-acid / WET | Compatible with the lead-acid programme specified by the battery manufacturer. |
| AGM / VRLA | Compatible. Use the absorption and float voltages recommended for the battery; AGM batteries do not all require the same settings. |
| Gel / VRLA | Compatible with the correct gel profile and voltage limits. Avoid overvoltage and reconditioning unless authorised by the battery manufacturer. |
| LiFePO4 lithium | Compatible with the lithium/LiFePO4 profile and a suitable BMS. Do not use lead-acid equalisation or reconditioning. |
Select Normal, High or Li-ion using the controls available on this model or VictronConnect. AGM and gel are not universal programmes: the final settings must match the battery datasheet.
Not intended for non-rechargeable cells, NiMH or Ni-Cd batteries. Chemical compatibility does not mean that every capacity or voltage is suitable. For LiFePO4, also observe charging temperature limits and BMS protections.
This universal-input version replaces the former 230 V PSC242551085. It retains Bluetooth and VE.Direct connectivity, while supporting 120-240 V supplies and reaching up to 96% efficiency at 230 V.
| Part number | PSC242551095 |
|---|---|
| System voltage | 24 V |
| AC input | 85-250 VAC; full power from 100 VAC |
| DC input | 90-375 VDC |
| Frequency | 45-65 Hz |
| Main charge current | 25 A |
| Low-current mode | 12.5 A |
| Starter-battery output | 4 A maximum |
| Maximum efficiency | 96% at 230 V / 94% at 120 V |
| Communication | Bluetooth and VE.Direct |
| Protection rating | IP43 electronics / IP22 connection area |
| Dimensions | 180 × 249 × 116 mm |
| Net weight | 2.7 kg |
The package contains the charger and installation and safety documentation. The country-specific AC power cable is ordered separately. Confirm that the battery bank is 24 V and that the 1+1 dual-output configuration is required.
Does the second output also provide 25 A?
No. The auxiliary output is limited to 4 A and is intended to maintain a starter battery.
Is it compatible with LiFePO₄?
Yes, when the correct profile is selected in VictronConnect.
Can it connect to a Cerbo GX?
Yes, through the appropriate VE.Direct connection.
Is an AC power cable included?
No. The AC cable is ordered separately.
Browse our 24 V battery chargers, battery monitors and the complete Victron Energy range.