Victron Skylla IP65 12V / 70A (1+1) 120-240V Battery Charger
V
Measurements: 401 x 265 x 151 mm
EAN/GTIN: 8719076051961
Victron Skylla IP65 12/70 (1+1) 120-240V Battery Charger
The Victron Skylla IP65 12/70 (1+1) 120-240V Battery Charger is part of the Victron Skylla IP65 Battery Charger range of Victron Energy and is compatible with a wide range of battery types, including lead-acid, gel, and AGM batteries, with capacity ranging from 350Ah to 700 Ah.
The Skylla IP65 Battery Charger is a high-quality battery charger that is designed to be versatile and reliable for marine and outdoor use. It is fully waterproof and dust-tight, with an IP65 rating, making it ideal for use in harsh environments.
The Victron Skylla IP65 12/70 (1+1) 120-240V Battery Charger has a LCD display for monitoring, a 7-stage adaptative charging algorithim and it features 2 outputs to charge 2 battery banks, with a voltage of 12V, and a charging current of 70A.
The charger features a 3-stage charging process, including a bulk stage, an absorption stage, and a float stage, which helps to prolong the life of your batteries and ensure that they are always fully charged and ready for use.
Specifications
Victron Skylla IP65 12/70 (1+1) 120-240V | SKY012070000 |
Input voltage and input voltage range | 120/230 V (90-265 V) |
Maximum AC input current @ 100 VAC | 12A |
Charge current, | 70A |
Charge current starter batt. (A) | 3A |
Power factor | 0,98 |
Frequency | 45 – 65 Hz |
Number of outputs | (1+1) models: 2 (2nd output via 2 pole terminal & 3 A max) |
Charge voltage 'absorption' | 14,4 V |
Charge voltage 'float' | 13,8 V |
Charge voltage 'storage' | 13,2 V |
Charge algorithm | 7 stage adaptive |
Charge algorithm Li-Ion | 3 stage, with on-off control or CAN-bus control |
Can be used as power supply | Yes |
Remote on-off port | Yes (can be connected to a Li-Ion BMS) |
CAN-bus communication port (VE.Can) | Two RJ45 connectors, NMEA2000 protocol, not isolated |
Synchronised parallel operation | Yes, with VE.Can |
Alarm relay | DPST AC rating: 240 VAC/4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC |
Protection | Battery reverse polarity (fuse). Output short circuit. Over temperature |
Operating temp. range | -20 to 60 °C (Full output current up to 40 °C) |
Humidity (non-condensing) | Max 95 % |
Battery connection | M6 bolts |
230 VAC connection | screw-clamp 6mm² (AWG 10) |
Protection category | IP65 |
Dimensions and weight | 401 x 265 x 151 mm / 6 kg |
Victron Skylla IP65 Battery Charger Range of Battery Chargers
The Skylla-IP65 Battery Charger is suitable for use in a wide range of applications, including off-grid and backup power systems, boats, RVs, and vehicles. It is a reliable and durable charger that is capable of delivering efficient and effective charging performance.
The Skylla-IP65 Battery Charger is a versatile and robust device with several features that make it an excellent choice for charging and maintaining lead-acid batteries. The charger comes in two models: the Skylla-IP65 (1+1), which has two isolated outputs, and the Skylla-IP65 (3), which features three full current outputs. Both models have IP65 protection and can withstand harsh environments such as heat, humidity, and salt air. The circuit boards are also protected with an acrylic coating for maximum corrosion resistance.
The charger's LCD display provides status monitoring and allows easy adaptation of the charge algorithm to a particular battery and its conditions of use. The CAN-bus interface (NMEA2000) allows connection to a CAN-bus network, a Skylla-i Control panel, or a Color Control digital display. Additionally, several chargers can be connected in parallel and synchronized through the CAN-bus interface.
The Victron Skylla-IP65 also includes several features to prevent battery damage and extend battery life. The charger has a variable absorption time, which adjusts to the battery's discharge level to prevent overcharging. T
he BatterySafe mode prevents damage from excessive gassing by limiting the rate of voltage increase once the gassing voltage is reached.
The Storage mode kicks in after 24 hours of no discharge to minimize gassing and corrosion of the positive plates. The charger also has temperature compensation, which decreases the charge voltage with increasing battery temperature, and voltage sense to compensate for voltage loss due to cable resistance.
Finally, the Skylla-IP65 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.
The charger is also Li-Ion (LiFePO4) ready, allowing simple charger on-off control by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger. Complete control of voltage and current can be achieved by connecting to the CAN-bus port.
Overall, the Victron Skylla-IP65 Battery Charger is an excellent choice for charging and maintaining lead-acid batteries with its versatile features and robust design.
If you're looking for a way to remotely monitor and control your Skylla IP65 battery charger, the Victron Skylla-i Control is the perfect accessory. With LED status indicators, you can keep track of the charging process and the remote panel allows for input current adjustment to limit the power drawn from the AC supply. This feature comes in handy when using limited shore power or small gensets.
Plus, you can connect multiple control panels to one charger or to a set of parallel connected chargers for added convenience. Improve your charging setup with the Victron Skylla-i Control (see below in accesories for the Victron Skylla IP65 battery charger).
Victron Accesories for the Skylla IP65 Battery Charger (not inlcuded in the product)
- Victron Skylla-i Control (Ref. REC000300010R)
- Victron BMV-712 Smart Battery Monitor (Ref. BAM030712000R)
- Victron Smartshunt 500A/50mV (Ref. SHU050150050)
About Victron Energy
Since its founding in 1973 by Reinout Vader in the Netherlands, Victron Energy has become a trusted leader in off-grid electrical power generation for recreational and commercial applications. With a strong focus on quality, reliability, and technical innovation, Victron Energy has gained a reputation for delivering top-of-the-line products in battery storage and charging systems, as well as customized network solutions for self-supporting electrical power generation systems.
Victron Energy's long history and unrivaled experience in the self-supporting electrical power generation industry, combined with its commitment to meet the needs of any installation regardless of difficulty, makes it the ideal partner for anyone seeking to generate electrical power off-grid.
The Victron Energy product range offers a wide variety of reliable, high-quality products, including:
- Inverters
- Gel, AGM and Li-Ion batteries
- Battery monitors
- Battery chargers
- Solar charge controllers
- Solar panels
- Sinewave inverters
- Inverters/Chargers
- DC-DC Converters
- Transfer Switches
In addition to their products, Victron Energy also provides a variety of software tools and resources to help customers design, configure, and monitor their systems. This includes tools for system design, battery sizing, and system monitoring, as well as online training resources and technical support.
One of the key advantages of choosing Victron Energy is its worldwide network of distributors and dealers, which provides clients with fast and competent customer service and technical support, no matter where they are located. When you choose Victron Energy, you can trust that you're getting a top-quality product backed by unparalleled expertise and customer service.
Product Warranty
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.
Data sheet
- Volt (V)
- 12
- Current (A)
- 70
- Large (mm)
- 401
- Width (mm)
- 265
- Height (mm)
- 151
- Weight (kg)
- 6
- Bluetooth
- No
You might also like