Charge controller Victron BlueSolar PWM-Pro 12/24V-10A
V
V
Measures: 138 x 70 x 37mm
EAN/GTIN: 8719076025283
BlueSolar PWM-Pro 12V-24V 10A Charge Controller
The Victron BlueSolar PWM-Pro 12/24V 10A regulator implements the PWM controller, simple, lightweight and low cost, with advanced functions fully programmable via computer or with the BlueSolar-Pro remote panel (not included).
Characteristics
Fully programmable lighting control function with day/night timer options.
The regulator charges the batteries in three programmable stages: initial, absorption and float. It has built-in battery monitoring function (remote panel is required to view status).
It has an external temperature sensor input (not included).
The regulator is protected against over current, short circuits and reverse polarity of the panels or the battery, to avoid accidents and damage to the devices.
Specifications
Battery voltage | 12/24V (Auto detection) |
Rated charging current | 10A |
Automatic load shedding | Yes |
Maximum solar voltage | 28V/55V |
Self-consumption | < 10 mA |
Load output | Manual control + low voltage disconnection |
Protection | Battery polarity reversal (fuse), Output short circuit, Over temperature |
Ground | Positive Common |
Working temperature range | -20 to +50°C |
Humidity (non-condensing) | Max. 98% |
Protection type | IP30 |
Weight | 0.13 Kg |
Measures | 138 x 70 x 37mm |
Warranty
5 years
Data sheet
- Volt (V)
- 12
24 - Current (A)
- 10
- Tecnología
- PWM
- Large (mm)
- 138
- Width (mm)
- 70
- Height (mm)
- 37
- Weight (kg)
- 0.13
- Bluetooth
- No
You might also like