Charge Controller Victron BlueSolar PWM-LCD & USB 12/24V 20A
V
Measures: 102 x 184 x 48 mm
EAN/GTIN: 8719076046202
Charge controller BlueSolar PWM-LCD & USB 12/24V 20A
Thecharge controller BlueSolar PWM LCD & USB 12/24V 20A implements the PWM controller, simple, lightweight and low cost. It features a liquid crystal display for monitoring and configuration. The fast adjustment of the settings and the timer is performed through the seven segments and the two-digit display.
The regulator charges the batteries in three stages are not programmable: bulk, absorption and float. Algorithms are pre-programmed for the charging of batteries AGM, GEL, flooded and Lithium Iron (with BMS internal).
Features two USB ports 5 Volts and 2A of peak current (both outputs together).
It has internal temperature sensor to prevent overheating. The regulator is protected against over-current, short circuit and polarity reverse of the panels or of the battery, to avoid accidents and damaged equipment.
Specifications
Voltage of the battery | 12/24V (automatic Detection) |
Rated charge current | 20A |
Automatic load disconnect | Yes |
Maximum solar voltage | 28V/55V |
Self-consumption | < 10 mA |
Output load | Manual Control + disconnection by low voltage |
Protection | Reversal of the battery polarity (fuse), output Short circuit, Overtemperature |
Overload protection | Disconnection after 60 s in case of reaching the 130% load, timeout after 5 s in case of reaching the 160% load, immediate Disconnection in case of short circuit |
Grounding | Positive common |
Working temperature range | -35 to +60°C (full load) |
Humidity (without condensation) | Max. 95% |
Product Warranty
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.
Data sheet
- Volts (V)
- 24
- Intensity (A)
- 20
- Technology
- PWM
- Large (mm)
- 102
- Width (mm)
- 84
- Weight (kg)
- 0.15
- Bluetooth
- No
You might also like