shopping_cart Cart (0)
Charge controller Victron BlueSolar PWM-LCD & USB 12/24V 10A
€25.04
Tax included
12
V
V
24
V
V
Measures: 96 x 169 x 36 mm
EAN/GTIN: 8719076046189
Description of the Charge controller BlueSolar PWM-LCD & USB 12/24V 10A
The regulator BlueSolar PWM LCD & USB 12/24V 10A implements the PWM controller, simple, lightweight and low cost. It features a liquid crystal display for monitoring and configuration. The fast adjustment of the settings and the timer is performed through the seven segments and the two-digit display.
The regulator charges the batteries in three stages are not programmable: bulk, absorption and float. Algorithms are pre-programmed for the charging of batteries AGM, GEL, flooded and Lithium Iron (with BMS internal).
Features two USB ports 5 Volts and 2A of peak current (both outputs together).
It has internal temperature sensor to prevent overheating. The regulator is protected against over-current, short circuit and polarity reverse of the panels or of the battery, to avoid accidents and damaged equipment.
Technical characteristics of the Charge controller BlueSolar PWM-LCD & USB 12/24V 10A
| Voltage of the battery | 12/24V (automatic Detection) |
| Rated charge current | 10A |
| Automatic load disconnect | Yes |
| Maximum solar voltage | 28V/55V |
| Self-consumption | < 10 mA |
| Output load | Manual Control + disconnection by low voltage |
| Protection | Reversal of the battery polarity (fuse), output Short circuit, Overtemperature |
| Overload protection | Disconnection after 60 s in case of reaching the 130% load, timeout after 5 s in case of reaching the 160% load, immediate Disconnection in case of short circuit |
| Grounding | Positive common |
| Working temperature range | -35 to +60°C (full load) |
| Humidity (without condensation) | Max. 95% |
| Weight | 0.15 Kg |
| Measures | 96 x 169 x 36 mm |
SCC010010050
Data sheet
- Volt (V)
- 12
24 - Current (A)
- 10
- Tecnología
- PWM
- Bluetooth
- No
You might also like
Measures: 96 x 169 x 36 mm