Victron Battery Protect 48V 100A Battery Protector
V
Measures: 62 x 123 x 120 mm
EAN/GTIN: 8719076021469
Victron Battery Protect 48V 100A Battery Protector
The Battery Protector Victron Battery Protect 48V 100A is designed to automatically disconnect a system with a maximum continuous load current of 100A when this exceeds 64V , and can be set to activate or deactivate at a variety of voltages. Its seven-segment display will show which setting has been selected.
Victron Battery Protect Productline
Before the battery is completely depleted, which could damage it, or before it has too little power left to start the engine, BatteryProtect disconnects the battery from non-essential loads. It features ultra-low current draw, which is very important in the case of lithium-ion batteries, surge protection to safeguard sensitive loads, and is ignition proof (no sparks).
BatteryProtect is a unidirectional device, which means it can only handle current flowing in one direction, such as current from a charger or current to a load, but not both currents simultaneously. Also, the only direction current can flow is from the battery terminal to the load terminal. The battery connects to the battery terminal when used with a load, while the charger connects to the battery terminal when used with a charger.
The on/off input can be used as a system on/off switch.
BatteryProtect features a unique configuration for lithium-ion batteries that can be controlled with the Victron VE.Bus BMS (Battery Management System), a stand-alone product (not included in the price). In addition, BatteryProtect can be used as a charging switch between a battery charger and a lithium-ion battery.
If the battery voltage drops below the predetermined disconnect level for more than 12 seconds, the alarm output is activated. As a result, starting the engine will not activate the alarm. The alarm output is an open collector short-circuit proof output to the negative (negative) rail with a maximum current of 50 mA. Typically the alarm output is used to activate a buzzer, LED or relay.
90 seconds after the alarm is activated, the load will be disconnected. If the battery voltage returns to the connection threshold within this time period - for example, after starting the engine - the load will not be disconnected.
After 30 seconds, the load will reconnect if the battery voltage exceeds the specified reconnect value.
Please note that BatteryProtect is not designed for reverse currents from charging sources.
Specifications
Max. continuous charging current | 100A |
Peak current (for 30 seconds) | 250A |
Operating voltage range | 24 –64V |
Current draw when on | 2mA |
Current draw when off or low voltage shutdown | 1.5mA |
Alarm output delay | 12 seconds |
Maximum load on alarm output | 50 mA (short-circuit proof) |
Load disconnection delay | 90 seconds (immediate if activated by the VE.Bus BMS) |
Load reconnection delay | 30 seconds |
Default thresholds when disabled | 42V |
Default thresholds when on | 48V |
Operating temperature range | Full load: -40 °C to +40 °C (up to 60% of rated load at 50 °C) |
IP Classification | Electronics: IP67 (encapsulated) Connections: IP00 |
Connection | M8 |
Mounting pair | 9Nm |
About Victron Energy
Founded in 1973 in the Netherlands by Reinout Vader, Victron Energy began by manufacturing and supplying inverter/chargers to the marine, land, industrial and automotive sectors. Since then it has grown to become the world leading mannufacturer in the sector of off-grid electrical power generation, both for recreational and commercial applications.
Victron Energy stands out for the quality, reliability and technical innovations of its products for battery storage and battery charging systems, as well as for its ability to provide complete customized network solutions for self-supporting electrical power generation systems.
Victron Energy has a long history, unrivaled experience and reputation in thes elf-supporting electrical power generation industry. Victron Energy products have been designed to meet the needs of any installation, regardless of the degree of difficulty that it presents.
The Victron Energy product range includes, among others:
- Inverters
- Gel batteries and AGM batteries
- Battery monitors
- Solar charge controllers
- Solar panels
- Battery chargers
- Sinewave inverters
- Inverters/Chargers
- DC-DC Converters
- Transfer Switches
Victron Energy has a worldwide network of distributors and dealers that enables it to offer a fast and competent customer service and technical support network, accessible from virtually every corner of the world.
Product Warranty
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.
Data sheet
- Volt (V)
- 48
- Current (A)
- 100
- Large (mm)
- 123
- Width (mm)
- 120
- Height (mm)
- 62
- Weight (kg)
- 0.8
- Bluetooth
- No