Victron Argofet 200-3 for 3 Batteries 200A Battery Isolator
Measures: 65 x 120 x 200 mm
EAN/GTIN: 8719076019152
Victron Argofet 200-3 for 3 Batteries 200A Battery Isolator
The Victron Argofet 200-3 Battery Isolator for 3 200A Batteries is a battery isolator that allows 3 200A batteries to be charged at the same time from a single battery charger or alternator without need to connect the batteries together. For example, if an auxiliary battery is discharged this will not cause the starter battery to be discharged as well.
Compared to diode battery isolators (Argodiode), FET isolators produce nearly zero voltage drop: at low current, the voltage drop is approximately 0.02V and at nominal output, estimated to be 0.1V.
Please note that when installing a FET battery isolator, you should seek professional assistance. Simply putting the isolator between the alternator and the batteries can marginally reduce the charging voltage. As a result, the batteries may not be fully charged and their life cycle may be shortened as a result.
Specifications
Brand | Victron |
Model | Argofet 200-3 3 Batteries of 200A |
Reference | ARG200301020 |
Maximum charging current | 200A |
Alternator maximum current | 200A |
Number of batteries | 3 |
Alternator enable input | Yes |
Connection | M8 screws |
Victron Argofet Battery Isolator Product Line
All models in the Victron Argofet FET battery isolators product line do not require the alternator output voltage to be increased. In any case, it is advisable that the cables have a suitable section and are short to avoid energy losses.
Some alternators require DC voltage on the B+ output to start charging. When the alternator is directly connected to a battery, DC is unavoidable. However, inserting a diode or FET divider will prohibit any return voltage/current from the batteries to the B+, resulting in a non-starting alternator.
When the engine run/stop switch is closed, the Argofet 'AC' battery isolators will power the B+ via a specific current limited power input.
About Victron Energy
Founded in 1973 in the Netherlands by Reinout Vader, Victron Energy began by manufacturing and supplying inverter/chargers to the marine, land, industrial and automotive sectors. Since then it has grown to become the world leading mannufacturer in the sector of off-grid electrical power generation, both for recreational and commercial applications.
Victron Energy stands out for the quality, reliability and technical innovations of its products for battery storage and battery charging systems, as well as for its ability to provide complete customized network solutions for self-supporting electrical power generation systems.
Victron Energy has a long history, unrivaled experience and reputation in thes elf-supporting electrical power generation industry. Victron Energy products have been designed to meet the needs of any installation, regardless of the degree of difficulty that it presents.
The Victron Energy product range includes, among others:
- Inverters
- Gel batteries and AGM batteries
- Battery monitors
- Solar charge controllers
- Solar panels
- Battery chargers
- Sinewave inverters
- Inverters/Chargers
- DC-DC Converters
- Transfer Switches
Victron Energy has a worldwide network of distributors and dealers that enables it to offer a fast and competent customer service and technical support network, accessible from virtually every corner of the world.
Product Warranty
Standard warranty of 5 years, extendable to 10 years with an additional 10% of the initial investment. Contact us for more information.