
Ah
V

Sealed LONG WP5-12E AGM/VRLA battery rated at 12V and 5Ah, with a compact 90 × 70mm footprint. Check the overall height, Faston F1 terminal and polarity before replacing a battery in alarms, emergency lighting, small UPS or backup equipment.
| Nominal voltage | 12V |
|---|---|
| Capacity and discharge rating | 5Ah |
| Dimensions | 90 × 70 × 101.5mm; overall height 107mm |
| Approximate weight | 1.9kg |
| Internal resistance | 18mΩ |
| Maximum discharge | 75A for 5 seconds |
| Terminals | Faston F1 |
| Cyclic charge at 25°C | 14.4–15.0V; maximum initial current 1.5A |
| Standby/float charge at 25°C | 13.5–13.8V at 25°C |
The compact WP5-12E is intended for compatible standby and general-purpose equipment such as alarm panels, emergency lighting, small UPS units, electronic backup and portable devices. Application names are guidance only: the equipment voltage, charging system, connector and required runtime determine suitability.
Do not select a replacement from “12V 5Ah” alone. Compare the LONG WP5-12E reference, 90 × 70mm case, 107mm overall height, Faston F1 terminal width, polarity and cable reach. A similar capacity can still have different connectors or physical dimensions.
Use a charger intended for sealed lead-acid AGM batteries and keep charge voltage within the manufacturer limits. Provide correctly rated wiring and overcurrent protection, prevent short circuits, secure the battery against movement and never combine batteries of different age, model or state of charge in one bank.
Data sheet
All perfect
You might also like