
Lead-Acid AGM Battery 12V 18Ah
Ah
V

LONG WP18-12SHR sealed 12V 18Ah high-rate AGM/VRLA battery for compatible UPS, backup and emergency-power equipment. Official size 181 × 76 × 167mm with M5 terminals; this model is 18Ah, not 22Ah.
EAN/GTIN: 4260030442515
| Nominal voltage | 12V |
|---|---|
| Capacity and discharge rating | 18Ah |
| Dimensions | 181 × 76 × 167mm |
| Approximate weight | 5.6kg |
| Internal resistance | 10.5mΩ |
| Maximum discharge | 270A for 5 seconds |
| Starting current | 200A at -18°C; 275A at 25°C |
| Terminals | M5 |
| Cyclic charge at 25°C | 14.4–15.0V; maximum initial current 5.4A |
| Standby/float charge at 25°C | 13.5–13.8V at 25°C |
The WP18-12SHR combines an 18Ah C20 capacity with high discharge performance for compatible UPS, emergency power, security, telecommunications and machinery-control backup. Its cranking figures describe discharge capability but do not by themselves make it a starter battery for every vehicle or engine.
Use the exact WP18-12SHR reference when possible. Check the 181 × 76 × 167mm case, M5 terminal hardware, polarity, cable lugs and discharge requirement. Do not replace it solely because another battery is labelled 12V 18Ah or uses the same case.
Use a charger intended for sealed lead-acid AGM batteries and keep charge voltage within the manufacturer limits. Provide correctly rated wiring and overcurrent protection, prevent short circuits, secure the battery against movement and never combine batteries of different age, model or state of charge in one bank.
Data sheet
You might also like
Lead-Acid AGM Battery 12V 18Ah
INNPO 12.8V 20Ah Deep-Cycle LiFePO4 Battery