230W Solar Energy Kit 12V

230W Solar Energy Kit for Caravaning, Camper, Nautical or other Solar Energy Installations equipped with 12 volt Batteries.

The solar kit includes the following components:

• Monocrystalline solar panel 12V 230W
• Victron BlueSolar Charge Controller PWM-LCD & USB 12/24V 10A
• 6mm black and red solar cable with MC4 Terminals
• Fixings + ABS cable gland in white.
• Bottle Sealant-Adhesive WURTH Polymer MS Color White (310ml)
• Installation Manual

Monocrystalline solar panel 12V 230W (1520 X 768 x 30 mm)

The 230W solar panel is made up of 36 monocrystalline cells, ideal for 12 volt installations.

The glass that has been used for the construction of this solar panel is very low in lead content, which allows a great transmissibility of solar radiation, therefore allowing the cells to capture the greatest possible energy.

Victron BlueSolar PWM-LCD Charge Controller & USB 12/24V 10A (96 x 169 x 36mm)

The Victron BlueSolar PWM LCD & USB 12/24V 10A is manufactured by Victron Energy, a manufacturer with great recognition in the sector.

The functionality of this equipment is to regulate the flow of energy that goes from the panels to the batteries and/or to the power outlet. Protects against short circuits, over-current, reverse polarity. Contributing therefore to avoid accidents and that solar panels, batteries and electrical devices do not break down. The Victron BlueSolar PWM solar charge controller has an LCD screen to keep track of the operation of each component of the solar energy installation at all times.

This regulator allows batteries to be charged in three stages: initial, absorption and float. It incorporates two USB outputs of 5 Volts and 2A of maximum current with which you can charge any electronic device that allows it. As a safety measure to avoid unwanted accidents, this regulator is internally equipped with a temperature sensor to prevent overheating.

Solar cable 6mm in diameter black and red color with MC4 Terminals (5 meters long)

Specific cable for solar energy installations with optimum conductivity. Flexible, halogen-free, highly resistant to fire and extreme temperatures (-40ºC to 120ºC). Also very resistant to exposure to UV rays, hence its manufacture with specific double insulation for outdoor use.

The cable has MC4 connectors incorporated into one of its ends. This type of connector is certified as IP65. The most recurrent in solar installations of this type, allowing its use outdoors due to its impermeability in the connection between panels or extensions. Easy and quick connection and disconnection.

Panel fixings + ABS grommet in white (136 x 98 x 50mm)

Corner brackets designed to fix rigid solar panels in caravans, campers or boats, among others, without the need for drilling.

The solar cable gland is prepared to maintain watertightness and so that when introducing the cables from the outside of the caravan, camper, boat, etc., to its interior, leaks, humidity or other possible damage are avoided.</p >

Both the fixings and the cable gland are resistant to water and ultraviolet rays due to their manufacture with ABS-type materials. We recommend its fixing with Würth polymer sealant-adhesive.

WURTH Polymer MS White Color Adhesive-Sealant Bottle (310ml)

The white WURTH Polymer MS Adhesive-Sealant has good mechanical resistance and high elasticity. Product tested and especially recommended for sealing cable glands, supports for rigid panels, and flexible solar panels supplied by our online store.